現代工業生產過程中，中頻感應爐和中頻電爐因其投資少、見效快、操作方便等優點，被廣泛運用。但是中頻感應爐和中頻電爐生產節能問題一直困擾著大多數廠家。下面我們從中頻感應爐和中頻電爐的生產特點及多年生產實踐經驗，從提高生產效率、提高熔化速度、減少熔煉時間幾方面入手，總結出了中頻爐感應爐和中頻電爐生產的節電的途徑。 In the process of modern industrial production, the intermediate frequency induction furnace and the intermediate frequency furnace are widely used because of their advantages such as little investment, quick operation and convenient operation. However, the energy saving problem of medium frequency induction furnace and medium frequency electric furnace has been perplexed most manufacturers. Below we from the characteristics of medium frequency induction furnace and intermediate frequency electric furnace production and many years of experience in production practice, from improving the efficiency of production, improve the melting speed, reduce the melting time several aspects, summarizes the intermediate frequency furnace and medium frequency induction furnace furnace production of electricity saving way. 　　首先應該延長連續冶煉時間，這樣能提高生產的效率；其次要合理配料，這樣提高了熔煉的準確度；然后是合理的冶煉操作，其中要注意生產的安全性；然后是合理控制出鋼溫度，可以保證生產的質量不出問題；最后是要保持設備完好，出現故障及時維修，對設備要定時進行維修和保養。 Firstly, continuous smelting time should be extended to improve the efficiency of production. Secondly, the rational ingredient should be used to improve the accuracy of smelting. Then reasonable smelting operation, which should pay attention to the safety of production; Then it is reasonable to control the steel temperature to ensure the production quality is not a problem; In the end, the equipment should be kept in good condition, the equipment should be repaired in time, and the equipment should be repaired and maintained regularly. 　　通過合理安排生產、合理配料爐，冶煉作業以及合理控制出鋼液溫度，都可以縮短熔煉時間，以每爐次平均冶煉時間80min～90min計，每縮短1min的冶煉時間，就可節約1%的電能。爐襯的質量和冶煉設備完好是安全生產、提高生產效率和節能降耗的基礎。必須科學管理，采取綜合措施并切實加以落實，提高生產效率，提高熔化速度，減少熔煉時間，從而達到節約電能的目的 Through the reasonable arrangement of the production, the reasonable ingredients furnace, smelting operation and reasonable control of liquid steel temperature, can shorten the melting time, per 80 min min to 90 per furnace smelting time, 1 min per shorten smelting time, can save 1% of its electricity. The quality of lining and smelting equipment are the basis of safe production, production efficiency and energy saving. It must be scientific management, take comprehensive measures and implement them effectively, improve production efficiency, improve the melting speed and reduce the melting time, thus achieving the purpose of saving electricity